Nagpur · Maharashtra

Fresh Air Ventilation in Nagpur

Hot semi-arid — India's hottest major city, extreme temperature range

InAir Fresh Air Ventilation in Nagpur
Summer temp
44–48°C
Humidity
20–60% RH
AQI range
80–160
Filter grade
MERV-13 (HEPA-13 for sensitive occupants)

What makes ventilation difficult in Nagpur?

Nagpur regularly records India's highest temperatures (46–48°C) with no moderating sea breeze. Its central geographic location experiences maximum solar radiation. Extreme summer heat places maximum stress on any ventilation system.

Which machine is right for Nagpur?

RHP Series (Premium) · Revita ERV + MERV-13 (Standard)

At 48°C outdoor temperature, every degree of ERV heat recovery translates to meaningful AC savings. RHP's active cooling compounds this — delivering 22–28°C fresh air regardless of outdoor temperature. Humidity is moderate, so Revita ERV is viable for cost-conscious residential. RHP strongly recommended for commercial and institutional use where fresh air conditioning quality matters most.

For Nagpur we specify Revita ERV or RHP Heat Pump as the default, with MERV-13 (HEPA-13 for sensitive occupants) filtration. Models: RHP INA-RHP Series (premium), Revita INA-MFQR + MERV-13 (standard). Model-by-model airflow, static pressure and power figures are on the spec sheets.

Typically installed in: All residential and commercial — RHP preferred for commercial scale.
Also worth considering: Standard Revita ERV + good AC system works adequately for budget residential

How is a system sized here?

Sizing is driven by occupancy, not floor area — CO2 comes from people, so a small crowded flat needs more air than a large empty one. ASHRAE 62.1 sets the airflow per person; that number picks the unit. Nagpur then adds two local constraints: a summer peak of 44–48°C, which decides how much heat recovery is worth paying for, and humidity of 20–60% RH, which decides whether plain recovery is enough or whether active dehumidification is needed.

Get a free Nagpur site survey Compare all 15 cities

Further reading

Nagpur questions

What do people in Nagpur ask?

Nagpur sees an AQI range of roughly 80–160 through the year. Nagpur regularly records India's highest temperatures (46–48°C) with no moderating sea breeze. Its central geographic location experiences maximum solar radiation. Extreme summer heat places maximum stress on any ventilation system. That range is what sets the filter grade: we specify MERV-13 (HEPA-13 for sensitive occupants) here.
RHP Series (Premium) · Revita ERV + MERV-13 (Standard). We recommend either the Revita ERV or the RHP heat-pump unit for Nagpur. At 48°C outdoor temperature, every degree of ERV heat recovery translates to meaningful AC savings. RHP's active cooling compounds this — delivering 22–28°C fresh air regardless of outdoor temperature. Humidity is moderate, so Revita ERV is viable for cost-conscious residential. RHP strongly recommended for commercial and institutional use where fresh air conditioning quality matters most.
MERV-13 (HEPA-13 for sensitive occupants). Filter grade follows the local AQI rather than a national default — MERV-13 handles ordinary urban particulate, while HEPA-13 is warranted where AQI regularly passes 200 or where dust and industrial sources are present. In Nagpur the range is 80–160.
Yes. InAir supplies and installs across India from its Hyderabad base, and Nagpur in Maharashtra is covered end to end — free site survey, duct design, supply, commissioning with measured airflow readings, and handover. A typical residential installation is commissioned ten to twelve days after order. Send a floor plan to sales@in-air.in and an engineer returns a sized proposal.
Sizing starts from occupancy rather than floor area, because CO₂ is produced by people. ASHRAE 62.1 gives the airflow per person; that figure sets the unit, and the Nagpur summer peak of 44–48°C plus humidity of 20–60% RH decides whether plain heat recovery is enough or whether active dehumidification is required.