Visakhapatnam · Andhra Pradesh

Fresh Air Ventilation in Visakhapatnam

Tropical coastal — humid, cyclone-prone, industrial port pollution

InAir Fresh Air Ventilation in Visakhapatnam
Summer temp
35–42°C
Humidity
70–90% RH
AQI range
80–180
Filter grade
HEPA-13 (industrial port city)

What makes ventilation difficult in Visakhapatnam?

Vizag is a major port city with steel and pharmaceutical industries. Coastal humidity is high year-round, cyclone season (October–December) brings extreme weather, and industrial sources from Vizag Steel and the port contribute to AQI.

Which machine is right for Visakhapatnam?

RHP Series + HEPA-13

Vizag's combination of coastal humidity (70–90% RH) and industrial PM2.5 from port and steel operations requires RHP treatment: active dehumidification removes coastal moisture from incoming air, while HEPA-13 captures both fine industrial particulates and sea salt aerosols. The system performs reliably through cyclone season and post-storm recovery phases.

For Visakhapatnam we specify RHP Heat Pump ERV as the default, with HEPA-13 (industrial port city) filtration. Models: RHP INA-RHP Series (ceiling or floor-standing). Model-by-model airflow, static pressure and power figures are on the spec sheets.

Typically installed in: Apartments · Villas · Offices · Healthcare · Port-area commercial.
Also worth considering: Revita ERV with HEPA-13 filter box for budget projects away from immediate port and industrial zones

How is a system sized here?

Sizing is driven by occupancy, not floor area — CO2 comes from people, so a small crowded flat needs more air than a large empty one. ASHRAE 62.1 sets the airflow per person; that number picks the unit. Visakhapatnam then adds two local constraints: a summer peak of 35–42°C, which decides how much heat recovery is worth paying for, and humidity of 70–90% RH, which decides whether plain recovery is enough or whether active dehumidification is needed.

Get a free Visakhapatnam site survey Compare all 15 cities
Visakhapatnam questions

What do people in Visakhapatnam ask?

Visakhapatnam sees an AQI range of roughly 80–180 through the year. Vizag is a major port city with steel and pharmaceutical industries. Coastal humidity is high year-round, cyclone season (October–December) brings extreme weather, and industrial sources from Vizag Steel and the port contribute to AQI. That range is what sets the filter grade: we specify HEPA-13 (industrial port city) here.
RHP Series + HEPA-13. We recommend the RHP heat-pump energy recovery unit for Visakhapatnam. Vizag's combination of coastal humidity (70–90% RH) and industrial PM2.5 from port and steel operations requires RHP treatment: active dehumidification removes coastal moisture from incoming air, while HEPA-13 captures both fine industrial particulates and sea salt aerosols. The system performs reliably through cyclone season and post-storm recovery phases.
HEPA-13 (industrial port city). Filter grade follows the local AQI rather than a national default — MERV-13 handles ordinary urban particulate, while HEPA-13 is warranted where AQI regularly passes 200 or where dust and industrial sources are present. In Visakhapatnam the range is 80–180.
Yes. InAir supplies and installs across India from its Hyderabad base, and Visakhapatnam in Andhra Pradesh is covered end to end — free site survey, duct design, supply, commissioning with measured airflow readings, and handover. A typical residential installation is commissioned ten to twelve days after order. Send a floor plan to sales@in-air.in and an engineer returns a sized proposal.
Sizing starts from occupancy rather than floor area, because CO₂ is produced by people. ASHRAE 62.1 gives the airflow per person; that figure sets the unit, and the Visakhapatnam summer peak of 35–42°C plus humidity of 70–90% RH decides whether plain heat recovery is enough or whether active dehumidification is required.